Magnetic Tech Makes Magic Change - MagnTek - Magnetic Sensor ICs - Position Detection / Motion Control - MagnTek - Magnetic Sensor ICs

English Chinese

Superior products

Closed-loop stepper motor magnetic angle encoder chip

MT6835 High Speed Magnetic Angle Encoding IC

MagnTek's latest fourth-generation magnetic angle encoder IC, the new upgraded chip of MT6825, is based on anisotropic magnetoresistive (AMR) technology and proprietary signal processing technology to achieve an absolute value of 0°~360° Angle measurement.

More
High precision low temperature drift "current" sensor chip

MT9522 integrated current detection chip

MT9522 product series is a fully integrated design of isolated linear current sensor chip based on Hall effect, which is used for AC or DC current detection in industrial, commercial and communication systems.

More
Prevent external stray magnetic field from interfering with magnetic angle encoder chip

MT6701 Hall Magnetic Angle Encoding Detection IC

MagnTek launched a new generation of magnetic angle encoder chip based on the principle of differential Hall sensing. Induction of the magnetic field component perpendicular to the surface of the chip, with the rotation of a pair of pole magnetized radial magnets on the surface of the chip, MT6701 correspondingly outputs an angle signal of 0~360°.

More
Low-noise high-precision linear Hall sensor chip

MT910X factory programmed linear Hall IC

Using BCD technology, it has high performance and high reliability. With a working voltage of 3.0V~5.5V, when there is no external magnetic field, the output is one-half of Vcc, and the output changes linearly with the intensity of the magnetic field. With excellent temperature compensation ability, the chip can work in the environment of -40~150℃, and maintain excellent performance and consistency.

More
High-precision low-temperature drift "current" sensor chip

MT9222 built-in magnetic circuit type current detection IC

MagnTek's latest current sensor chip. The "current-magnetic" conversion module is integrated in the chip, and the Hall effect principle is used to convert the magnetism into a voltage output signal proportional to the input current. The series has a dielectric strength of 480 ovrms, "zero" hysteresis, and ultra-high-speed us-level response time. These characteristics are suitable for various "distributed photovoltaic inverters."

More
Automotive electronic certification high voltage switch Hall sensor chip

MT83XX High Voltage Hall Sensor IC

Using BCD technology, high performance and high reliability. A Hall sensor element is integrated in the chip. Wide working voltage (3.8V~60V), good reverse voltage protection capability and overcurrent protection capability, 200KHz sampling frequency. With excellent temperature compensation ability, the chip works in the environment of -40~150℃, and maintains excellent performance and consistency.

More
Dual output Hall sensor chip with built-in self-diagnosis function

MT891X Magnetic Switch Speed Detection IC

Using BCD technology, high performance and high reliability. A Hall sensor element is integrated in the chip. Wide working voltage (2.7V~24V), good reverse voltage protection capability and overcurrent protection capability, 100KHz sampling frequency. With excellent temperature compensation ability, the chip works in the environment of -40~150℃, and maintains excellent performance and consistency.

More

About us

Shanghai Magntek Microelectronics Inc. (Shanghai Magntek Microelectronics Inc., hereinafter referred to as "MagnTek") was established in 2009 and is headquartered in Shanghai, with subsidiaries in Shenzhen, Chongqing and other places. It is a company specializing in magnetic A high-tech enterprise that develops, produces and sells sensor technology-based chips and sensor assemblies.

Scan attention

Magntek official WeChat

Obtain cutting-edge resources of
magnetic sensing technology

Play

Tel

+86-21-20965129

Anti-Counterfeiting Check

Anti-Counterfeiting Check